How To Make Industrial Boiler Installations Go More Smoothly

16 September 2021
 Categories: , Blog


If you had to purchase a new boiler system for an industrial worksite, you want to make sure installation is done correctly. Then, this system can work great and remain safe long-term. The following tips can help with an industrial boiler setup. 

Make Sure Setup Location Is Clean and Organized

Before your industrial boiler is shipped out by a manufacturer, take time to get the setup location ready. You can do so by cleaning it and making sure it's organized. Cleaning will ensure no left-over residues or chemicals come in contact with the boiler and start affecting its components.

Organizing the boiler setup location is important because it gives you easier access to this area. There won't be structures or systems in the way that you would have to move prior to getting an industrial boiler set up. 

Inspect Major Components Prior to Setup

Once your boiler system arrives, you want to inspect it carefully to make sure there aren't flaws that could affect the safety or performance of this heating system. Pay attention to things like wiring, air openings, fuel valves, and dampers.

If any of these components have red flags that indicate problems, you want to have them fixed before running the boiler system for the first time. You may need to have the system sent back to the manufacturer or specialized repair contractors may be able to assist. Making these adjustments is crucial for fewer issues in the future. 

Flush System With Clean Water Post-Installation 

Once you get done having a boiler system hooked up around an industrial site, make sure you flush it entirely with clean water. That will ensure any leftover substances like oil and dirt aren't able to move back through the boiler system.

Rather, the clean water will move them through the lines and leave behind a clean boiler system that can now work great for a long time. Even if you think your new boiler system is perfectly clean, it's always good to err on the side of caution and perform this cleaning. It won't take long and will keep your new boiler system away from trouble. 

If you spent money on an industrial boiler system for a worksite, make sure it doesn't go to waste by carefully managing the unit's installation. Steps like cleaning and part inspections are all great for having this system hooked up a lot faster and getting the best performance out of it. 

For more information, contact a boiler installation service like ESI Boiler Rentals LLC.